■ AC test frequency: 50Hz-300kHz, 

                 Accuracy: 0.1%

■ DC test range: 0V-5V, Accuracy: 10%

■ Maximum 128 pin for sweeping and testing

■ Insulation resistance of more than 10G

■ 7”TFT LCD truecolor display screen, 16-bit , 800X480 

   resolution

■ Cotex_M3 processor core

■ Selectable Chinese and English operation interface

■ Selectable RS232, RS485, GPIB, USB, LAN and Handler

   interfaces

■ USB interface can be used for storage of setup files and test 

   data as well as upgrade of the program 

■ AC test frequency: 50Hz-300kHz, Accuracy: 0.1%

■ DC test range: 0V-5V, Accuracy: 10%

■ Maximum 128 pin for sweeping and testing

■ Insulation resistance of more than 10G

■ 7”TFT LCD truecolor display screen, 16-bit , 800X480 

   resolution

■ Cotex_M3 processor core

■ Selectable Chinese and English operation interface

■ Selectable RS232, RS485, GPIB, USB, LAN and Handler

   interfaces

■ USB interface can be used for storage of setup files and test 

   data as well as upgrade of the program 

■ Test Pin: 256 pin, four-terminal test

■ Conductance, Transient open and short 

   circuit, Hipot, IR, Component test.

■ (Patent) High and low voltage separation 

   technology, insulation impedance>100GΩ

■ Built-in 10A independent DC current source for pressure

   dropping test

■ 7” TFT LCD TrueColor display screen, 16-bit,

   800X480 resolution

■ Firmware update through U disk

■ Selectable Chinese and English operation interface

■ (Patent) 4 high-pressure test modes: a pair of other, 

   dichotomy, automatic test, grounding test.

■ Excellent and reliable ARC detection function

■ Testing resistance, capacitance, diode and other components

   using four-terminal testing technology

■ The module equipped with independent read-write chip 

   detects whether the chip in the wire is working normally

■ Support for connector testing 

■ Support multi-file testing, providing flexible solutions for

   complex wires

■ Handler supports up to 40 outputs

■ Communication command provides two instruction

   systems: SCPI and Mode Bus

■ Provide instrument self-inspection function, check 

   instrument fault on line

■ Test Pin: 192 pin, four-terminal test

■ Conductance, Transient open and short 

   circuit, Hipot, IR, Component test.

■ (Patent) High and low voltage separation 

   technology, insulation impedance>100GΩ

■ Built-in 10A independent DC current source for pressure

   dropping test

■ 7” TFT LCD TrueColor display screen, 16-bit,

   800X480 resolution

■ Firmware update through U disk

■ Selectable Chinese and English operation interface

■ (Patent) 4 high-pressure test modes: a pair of other, 

   dichotomy, automatic test, grounding test.

■ Excellent and reliable ARC detection function

■ Testing resistance, capacitance, diode and other components

   using four-terminal testing technology

■ The module equipped with independent read-write chip 

   detects whether the chip in the wire is working normally

■ Support for connector testing 

■ Support multi-file testing, providing flexible solutions for

   complex wires

■ Handler supports up to 40 outputs

■ Communication command provides two instruction

   systems: SCPI and Mode Bus

■ Provide instrument self-inspection function, check 

   instrument fault on line

■ Test Pin: 128 pin, four-terminal test

■ Conductance, Transient open and short 

   circuit, Hipot, IR, Component test.

■ (Patent) High and low voltage separation 

   technology, insulation impedance>100GΩ

■ Built-in 10A independent DC current source for pressure

   dropping test

■ 7” TFT LCD TrueColor display screen, 16-bit,

   800X480 resolution

■ Firmware update through U disk

■ Selectable Chinese and English operation interface

■ (Patent) 4 high-pressure test modes: a pair of other, 

   dichotomy, automatic test, grounding test.

■ Excellent and reliable ARC detection function

■ Testing resistance, capacitance, diode and other components

   using four-terminal testing technology

■ The module equipped with independent read-write chip 

   detects whether the chip in the wire is working normally

■ Support for connector testing 

■ Support multi-file testing, providing flexible solutions for

   complex wires

■ Handler supports up to 40 outputs

■ Communication command provides two instruction

   systems: SCPI and Mode Bus

■ Provide instrument self-inspection function, check 

   instrument fault on line

■ Test Pin: 64 pin, four-terminal test

■ Conductance, Transient open and short 

   circuit, Hipot, IR, Component test.

■ (Patent) High and low voltage separation 

   technology, insulation impedance>100GΩ

■ Built-in 10A independent DC current source for pressure

   dropping test

■ 7” TFT LCD TrueColor display screen, 16-bit,

   800X480 resolution

■ Firmware update through U disk

■ Selectable Chinese and English operation interface

■ (Patent) 4 high-pressure test modes: a pair of other, 

   dichotomy, automatic test, grounding test.

■ Excellent and reliable ARC detection function

■ Testing resistance, capacitance, diode and other components

   using four-terminal testing technology

■ The module equipped with independent read-write chip 

   detects whether the chip in the wire is working normally

■ Support for connector testing 

■ Support multi-file testing, providing flexible solutions for

   complex wires

■ Handler supports up to 40 outputs

■ Communication command provides two instruction

   systems: SCPI and Mode Bus

■ Provide instrument self-inspection function, check 

   instrument fault on line

■7-inch TFTLCD true color display, 800X480 resolution, 16-bit color.

■Internal storage space 3M

■Support U disk to store test files

■One-click screen capture function, pictures are automatically stored to U disk

■The program can be upgraded online via U disk

■Chinese and English optional operation interface

■Maximum provides 512 (two-wire)/256 (four-wire) channels, divided into 8 slots A, B, C, D, E, F, G, H

■(Patent) Provides 750VAC and 1000VDC high voltage test functions, adopts high and low voltage separation technology, makes its own insulation resistance up to 100G or more, and has a wider test range

■(Patent) Provide 4 kinds of high voltage test methods: one pair of other, dichotomy, automatic test, ground test 4 methods

■Provide excellent and reliable arc detection function

■Testing resistance, capacitance, diode and other components, using four-terminal test technology, higher test accuracy; using voltage and current separation parallel sampling technology, sampling data faster

■Support Typec related wire test, provide a complete test plan, and add the function of one-key setting of components.

■An independent DC constant current source is set inside, which can provide a maximum of 10A constant current source for measuring the voltage drop of the line

■An independent read-write chip module is built in to check whether the chip in the wire is normal

■Support connector test, provide multi-product test function, and signal output of each product.

■Support multi-file testing, providing more and more flexible testing solutions for complex wires.

■HANDLER interface, supports 16 outputs, all options are relay driven, and the user can freely define the signal and level of each channel

■Communication command provides SCPI command system

■Provide instrument self-check function and maintenance function, and can perform online troubleshooting of instrument faults