TH2826 LCR Meter

RS232、USBHOST、USBDEVICE、HANDLER、LAN

GPIB

Performance characteristics

 Freq: 20Hz-5MHz, max. resolution 10mHz 

 Test Accuracy: 0.1%

 Test Speed: 200 times/s

 Multi-parameter with multi-frequencylist sweep function

 Test level:10mV-5V with the resolution of 1mV

 320×240 dot-matrix large graphic LCD display

 5-digit display resolution

 22 parameter combinations available

 4 signal source output impedance

 10 points list sweep function

 Built-in DC bias source

 External AC bias up to 40A (option)

 Auto level control (ALC) function of voltage or current

V,I test signal level monitor function

Graphic scanning and analyzing function

20 groups of setting for storage/load

Built-in comparator, 10-bins and bin counters

Multiple communication interfaces

2m/4m cable length extension

Optional Chinese and English language operating interface

■ Software upgrade through USB HOST

Brief Introduction

TH2826 series is a new generation impedance test instrument and firstly in conformity with LXI standard inland. It fulfills most low-voltage parameter measurement needs for components and materials with its basic accuracy (0.1%), wide frequency range(from 20Hz to 5MHz). The instrument is widely applied in microphone, resonator, inductor, ceramic capacitor, LCD, varactor and transformer .etc to analyze electrical performance and test low-ESR capacitor and high-Q inductor.    With the super high test speed, TH2826 series is especially for frequency response curve analyzing of detector and piezoelectric device on auto production line. Its multiple output impedance mode can be used for different standards of inductor or transformer manufacturers.

With its prominent performance, TH2826 series is in conformity with commercial and military standards, such as IEC and MIL standards.


Application
Technical Parameter
ModelTH2826
Test frequency20Hz–5MHz with resolution of 10mHz
Measurement ParametersC, L, R,Z,Y,X,B, G, D, Q, θ, DCR
Test Levelf≤1MHz10mV–5V,±(10%+10mV)
f>1MHz10mV–1V,±(20%+10mV)
Output impedance10Ω, 30Ω, 50Ω, 100Ω
Basic Accuracy0.1%
Display RangeL0.0001 uH – 9.9999kH
C0.0001 pF – 9.9999F
R,X,Z,DCR0.0001 Ω – 99.999 MΩ
Y, B, G0.0001 nS – 99.999 S
D0.0001 – 9.9999
Q0.0001 – 99999
θ-179.99° – 179.99°
Measuring Speed(meas/sec)Fast: 200(f>30kHz),100(f>1kHz)Med: 25, Slow: 5
Calibration  functionOpen/Shot /load
EquivalentmodeSerial, Parallel
Ranging ModeAuto and Hold
Display ModeDirect,  ABS,  Rel
Trigger ModeInternal, Manual, External, BUS
Internal DC bias sourceVoltagemode-5V – +5V,±(10%+10mV), with the resolution of 1mV
Currentmode(internal resistance is50Ω)-100mA – +100mA, ±(10%+0.2mA), with the resolution of 20uA
Comparator  functionbins and bin counters
Display320×240 dot-matrix LCD display
Memorygroups of control settings can be saved
InterfaceUSB DEVICE( USBTMC and USBCDC support)
USB HOST(FAT16 and FAT32 support)
LAN(LXI class C support)
RS232C
HANDLER
GPIB(option)




Working Temperature & Humidity0°C − 40°C,  ≤90%RH
Power supplyVoltage99V−121V,198V−242V
Frequency47.5Hz−63Hz
Power Consumption≤ 80VA
Dimensions (W×H×D)400mmx132mmx385mm
WeightApprox. 10kg


Accessary
Standard
Accessories nameModel
Fixture TH26048
Short circuit TH26010
Kelvin test lead with box four-terminal insulation and lock TH26011BS
Optional
Accessories nameModel
Data download
Name of dataDownload Link
SpecificationDownload
TH2826 Operation Manual Download
Return to the top