TH2816B Precision LCR Meter
Performance characteristics

 Freq: 50Hz-200kHz, 37 frequency points 

 Test Accuracy: 0.1%

 Test Speed: Max. 33ms

  240×64 dot-matrix graphics LCD display

  Friendly user's interface and easy operation

  Programmable single-voltage level from 10mVrms to 

    2.0Vrms

  World-level stability and accuracy

  6 digit readout resolution

  Precision LOAD correction function

  Selectable signal source output impedances: 30Ω, 100Ω

  Direct control function for TH1773/TH1775 DC bias source 

 List sweep function for up to 4 frequencies, signal levels and 

   DC bias levels

  Direct, Δ ABS and Δ% display modes

  12 control setting files memory

  Built-in comparator, 10 Bins and bin counters (TH2816A/B)

  Built-in comparator, 4 Bins and bin counters(TH2817A)

  Test signal level monitor function

  Key lock function 

  Handler interface

  RS-232C and optional GPIB interfaces


Brief Introduction

TH2816B is a new precision LCR meter combined with years of technical experience and newest measurement technology of instrument industry. With powerful measurement functions, high performance and low cost, TH2816B has been one of the world advanced instruments, and it provides users a super value measurement resolution and experience. The meter offers stable 6 digit resolution, wide frequency range ( 50Hz to 200kHz for TH2816AB), programmable signal level (0.01V to 2.0V), up to 30 meas/sec measurement rate, 9 measurement ranges, 30Ω or 100Ω constant output impedance and friendly operation interface. TH2816B can be used for incoming inspection of components, quality control of product line and high accuracy laboratory use. The HANDLER, GPIB, RS232C interfaces make it easy to build an automatic component test system, 

Application

 Passive components:

  Evaluation of Impedance Parameters for Capacitors, Inductors,

  Cores, Resistors, piezoelectric devices, Transformers, Chip   Components, and Network Components

 Other components:

   Impedance evaluation of printed circuit boards, relays,    switches, cables, batteries, etc.



Technical Parameter

Model

TH2816B

Measurement Function

Test Parameter

|Z|, C, L, X, B, R, G, D, Q, θ

Basic Accuracy

0.1%

Equivalent Circuit

Series and Parallel

Math Function

Deviation and Percent Deviation

Ranging Mode

Auto, Hold

Trigger Mode

Internal, Manual, External and Bus

Measuring Speed

Slow:   1.5meas/sec Med: 10meas/sec Fast: 30meas/sec

Correction Function

Open, Short and Load corrections

Measurement Terminal

5 terminals

Averaging Rate

1—255 , TH2816A/TH2817A only

Delay Time

0—60sec , with step of 1ms

List Sweep

List sweep for up to 4 frequencies, signal levels and DC   bias levels

Display Mode

Direct,   ΔABS, Δ%, V/I( V/I monitor), Bin number and bin counter

Display

240×64 dot-matrix LCD display, 6-digit resolution

Test Signal

Signal Frequency

50Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 800Hz, 1kHz, 1.2kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz,   4kHz, 5kHz, 6kHz, 8kHz, 10kHz, 12kHz, 15kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz,   60kHz, 80kHz, 100kHz, 120kHz, 150kHz, 200kHz, 37 points

Output Impedance

30Ω , 100Ω

Test Level

10mVrms to 2.0Vrms, 10mV steps

θ(RAD)

-3.14159 — 3.14159

Δ%

-999.999% — 999.999%

Comparator, memory &   interface

Comparator

Function

Bins(BIN1 to BIN9 , OUT of bins), and additional AUX   bin

Memory

Control settings memory for store/recall

Interface

RS-232C, HANDLER, GPIB (Optional)

Measurement Display   Range

|Z|, R,X

0.00001Ω — 99.9999MΩ

C

0.00001pF — 999.999mF

L

0.00001μH — 9.99999kH

G,B

0.00001μS — 999.999S

D

0.00001 — 9.99999

Q

0.00001 — 99999.9

θ(DEG)

-179.999º — 179.999º


Accessary
Standard
Accessories nameModel
Four-end fixture TH26005A
Short circuit TH26010
Kelvin test lead with box four-terminal insulation and lock TH26011AS
Optional
Accessories nameModel
Data download
Name of dataDownload Link
SpecificationDownload
TH2816B Operation Manual Download
Return to the top